Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Configuration File Parameter Guide
C620 Administrator and Provisioning Manual
remoteDir.ldap_incall_lookup_enable
Enables or disables LDAP incoming call lookup. If enabled, the C620
searches the LDAP directory for the incoming call number. If the number
is found, the C620 uses the LDAP entry for CID info.
0 (disabled), 1 (enabled)
remoteDir.ldap_outcall_lookup_enable
Enables or disables LDAP outgoing call lookup. If enabled, numbers
entered in pre-dial or live dial are matched against LDAP entries. If a
match is found, the LDAP entry is displayed for dialing.
0 (disabled), 1 (enabled)
remoteDir.ldap_check_certificate
Enables or disables accepting only a trusted LDAP certificate.
0 (disabled), 1 (enabled)
remoteDir.xml.x.name
Sets the name of the directory as it will appear on the phone's Directory
list. For this and following parameters, x is the number of the XML
directory (1–3).
Text string
remoteDir.xml.x.uri
The location of the XML directory file, from which the phone will sync and
retrieve directory entries.
URI
remoteDir.xml.x.call_lookup_enable
Enables/disables the call lookup feature for incoming and outgoing calls.
0 (disabled), 1 (enabled)
remoteDir.xml.x.contact_entry_tag
Sets the tag name for directory entry.
Text string
159
Default:
0
Default:
0
Default:
0
Default:
Blank
Default:
Blank
Default:
0
Default:
DIR_ENTRY
Back to Contents
Advertisement
Table of Contents
