Broadsoft Directory And Calllogs - Snom C620 Administrator And Provisioning Manual

Setting
Work Phone Number
Attribute
Mobile Phone Number
Attribute
Other phone number
attribute
Lookup for Incoming
Calls
Lookup in Dialing Mode

Broadsoft Directory and CallLogs

The C620 supports the display of Broadsoft directories and call logs.
Using the WebUI
C620 Administrator and Provisioning Manual
Description
Sets the attribute for the work number. What you enter here
should match the work number attribute for entries on the
LDAP server (telephoneNumber, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Base Directory.
Sets the attribute for the mobile number. What you enter
here should match the mobile number attribute for entries
on the LDAP server (mobile, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Base Directory.
Sets the attribute for the other number. What you enter
here should match the other number attribute for entries on
the LDAP server (otherPhone, for example). This helps
ensure that the phone displays LDAP entries in the same
format as the Base Directory.
Enables or disables LDAP incoming call lookup. If enabled,
the phone searches the LDAP directory for the incoming
call number. If the number is found, the phone uses the
LDAP entry for CID info.
Enables or disables LDAP outgoing call lookup. If enabled,
numbers entered in pre-dial or live dial are matched
against LDAP entries. If a match is found, the LDAP entry
is displayed for dialing.
82
Back to Contents