Table of Contents
Advertisement
To access the WebUI:
1. Ensure that your computer is connected to the same network as the C620.
2. Find the IP address of the C620:
a. When the conference phone is idle, press
b. On the Main Menu, press to highlight Status & Settings, and then
press
c. With Status highlighted, press
d. With Network highlighted, press
e. Press to highlight IPv4 or IPv6, and then press
f.
Press to scroll down the screen to display the IP address.
3. On your computer, open an Internet browser. (Depending on your browser, some of the
pages presented here may look different and have different controls. Ensure that you
are running the latest update of your preferred browser.)
4. Type the C620 IP address in the browser address bar and press ENTER on your
computer keyboard.
The browser displays a window asking for your user name and password.
5. For the user name, enter admin. For the password, enter the default password,
admin. You can change the password later on the WebUI Security page, available
under Servicing.
6. Click OK.
The WebUI appears.
Click topics from the navigation bar along the top of the WebUI, and then click the links
along the left to view individual pages. For your security, the WebUI times out after 10
minutes, so if it is idle for that time, you must log in again.
Most WebUI configuration pages have a
you have made on the page. During a configuration session, click
on to the next WebUI page.
The remaining procedures in this section assume that you are already logged into the WebUI.
Using the WebUI
C620 Administrator and Provisioning Manual
.
37
.
.
.
.
button. Click
to save changes
before you move
Back to Contents
Advertisement
Table of Contents
