Voice Settings; Feature Access Codes Settings - Snom C620 Administrator And Provisioning Manual

Voice Settings

Setting
Min Local RTP Port
Max Local RTP Port

Feature Access Codes Settings

If your IP PBX service provider uses feature access codes, then enter the applicable codes
here.
Setting
Voicemail
DND ON
DND OFF
Call Forward All ON
Call Forward All OFF
Call Forward No Answer
ON
Call Forward No Answer
OFF
Using the WebUI
C620 Administrator and Provisioning Manual
Description
Enter the lower limit of the Real-time Transport Protocol (RTP)
port range. RTP ports specify the minimum and maximum port
values that the phone will use for RTP packets.
Enter the upper limit of the RTP port range.
Description
Enter the voicemail access code. The code is dialed when
the user selects a line from the Message menu.
Enter the Do Not Disturb ON access code.
Enter the Do Not Disturb OFF access code.
Enter the Call Forward All ON access code.
Enter the Call Forward All OFF access code.
Enter the Call Forward No Answer ON access code.
Enter the Call Forward No Answer OFF access code.
49
Back to Contents