Snom C620 Administrator And Provisioning Manual page 29

To set static DNS:
1. From the IPv4 or IPv6 menu, press
press
The Set static DNS menu appears.
2. On the Set static DNS menu, with static DNS highlighted, press
3. Press
4. On the Set Static DNS menu, press
5. Enter the IP address for the primary DNS server.
The value you enter will also be assigned to: IPv4 or IPv6 > Set Static IP > DNS1.
Press

Use the dial pad to enter numbers.

For IPv6, press 2 or 3 repeatedly to select the letters printed on the key.

For IPv6, press the

For IPv4, press the

6. Press
7. On the Set static DNS menu, press
8. Enter the IP address for the secondary DNS server. The C620 uses this server if the
primary server does not respond.
The value you enter will also be assigned to: IPv4 or IPv6 > Set Static IP > DNS2.
Configuration Using the Phone Menus
.
 
to select Enabled or Disabled, and then press
or
.
to delete numbers.
Backspc
key to add a : symbol.
key to add a . symbol.
Save .
.
C620 Administrator and Provisioning Manual
 
to highlight Set static DNS, and then
or
 
to highlight DNS 1, and then press
or
 
to highlight DNS 2, and then press
or
29
.
.
Back to Contents