Setting
Log Level
The logging levels are:
CRITICAL: Operating conditions to be reported or corrected immediately (for
example, an internal component failure or file system error).
ERROR: Non-urgent failures—unexpected conditions that won't cause the device
to malfunction.
WARNING: An indication that an error or critical condition can occur if action is not
taken.
INFO: Normal operational messages.
DEBUG: Developer messages for troubleshooting/debugging purposes.
Network Trace
To perform a network trace:
1. Start a network trace by clicking
2. Stop the network trace by clicking
3. Save the trace by clicking
capture.pcap file.
Download Log
To download the system log:
1. Click
2. After your browser prompts you to save the system.log file, save the file in the desired
location.
Using the WebUI
C620 Administrator and Provisioning Manual
Description
Sets the log level. The higher the level, the larger the
debug output.
5—ALL
4—DEBUG
3—INFO
2—WARNING
1—ERROR
0—CRITICAL
. The button changes to
.
. Your browser should prompt you to save the
.
108
.
Back to Contents