Table of Contents
Advertisement
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
Setting:
Description:
Values:
MAC-specific configuration file settings
Setting:
Description:
Values:
Configuration File Parameter Guide
C620 Administrator and Provisioning Manual
sip_account.dns_query_option
Select DNS query option for SIP traffic only:
0 (DNS query with A record only)
1 (DNS query with NAPTR/SRV/A)
DNS query for all other traffic (e.g. HTTP) should always perform
A record only.
0, 1
sip_account.shared_local_sip_port_enable
Allow the same SIP local port for multiple accounts.
If enabled, the SIP local port defined in parameter
sip_account.shared_local_sip_port will be used instead of the SIP
local ports defined for the accounts, parameter:
sip_account.x.local_sip_port.
0 (disabled), 1 (enabled)
sip_account.shared_local_sip_port
Defines the local SIP port to be used by all accounts, if enabled by
parameter sip_account.shared_local_sip_port_enable.
1-65535
sip_account.sips_uri_enable
Defines whether to use SIPS URI or SIP URI with TLS encryption.
1 = sips uri generated
0 = sip uri generated with "transport=tls". This was the deprecated
method of doing tls, which was replaced by sips uri. sips uri is our default
setting.
0, 1
sip_account.x.sip_account_enable
Enables account x to be used by the device.
0 (disabled), 1 (enabled)
129
Default:
1
Default:
0
Default:
5060
Default:
1
Default:
0
Back to Contents
Advertisement
Table of Contents
