Selecting Identity For Current Outgoing Call; Using Auto Dial - Snom MeetingPoint User Manual

snom MeetingPoint Ÿ User Manual
u
sing the
This section describes the functions of the phone with the standard factory
settings. If your phone was installed and/or set up by someone else, the
standard settings may have been changed. Please check with that person or
company if the phone does not react as described here.
The caller information displayed on the screen is controlled by the setting on
the phone's web interface > Preferences > General Information > Number
Display Style > drop-down list. The default setting is "Name".
m C
aking aLLs
See "Entering Letters, Numerals, and Special Characters" on page 13 for input
modes. See "Display Layout" on page 12 on identities available for outgoing
calls. See "Identities/Accounts" on page 39 on how to configure identities.
If more than one identity is shown on the display, the one with the black one
is the outgoing identity for the call and the number/name that will show on the
callee's phone. Select a different identity with the up or down arrows.
Note: See "Adding/Editing Entry on Web Interface" on page 25 on how to
assign a fixed outgoing identity to calls being made to a certain number.
The outgoing number will only be used automatically when the call is initi-
ated from the phone book!

Selecting Identity for Current Outgoing Call

Use

Using Auto Dial

A timespan in seconds must be selected from the drop-down menu of
Advanced > Behavior > Phone Behavior > Auto Dial. The phone will dial the
number on the display when the specified number of seconds has passed.
© 2009 snom technology AG
man_snomMeetingPoint_v101_en
p
hone
to select a different identity, if necessary.
Using the Phone
27