Table of Contents
Advertisement
C620 Administrator and Provisioning Manual
Wireless Conference Phone
The Wireless Conference Phone settings enable you to configure soft keys for the
conference phones that are registered to the base station.
Soft Keys
On the Soft Keys page, you can select which soft keys can appear on the Idle screen, the
Call Active screen, the Call Held screen and the Live Dial screen. You can also specify the
position of each soft key.
Some soft keys appear only under certain conditions. For example, the Line soft key on the
Idle screen appears only if there is more than one registered SIP account. When a
"conditional" soft key is not visible, the soft key's position is left empty.
Soft key levels with no soft keys will not be shown if there are multiple soft key levels (as
indicated by the and icons). Any soft key level where all soft keys are invisible will be
dynamically skipped when the user navigates through the available levels. On the C620, a
soft key level consists of three soft keys (populated or blank) in a row.
The soft key settings are also available as parameters in the configuration file.
See
""hs_settings" Module: Handset Settings" on page 133
Back to Contents
Using the WebUI
58
Advertisement
Table of Contents
