Snom C620 Administrator And Provisioning Manual page 26

To set static IP for the C620:
1. From the IPv4 or IPv6 menu, menu, press
then press
If Mode is set to Static IP, the Set static IP menu appears. If Mode is not set to Static
IP an error message appears briefly before returning you to the Network setting
menu.
2. On the Set static IP menu, with IP Address highlighted, press
3. Enter the Static IP Address.
Press

Use the dial pad to enter numbers.

For IPv6, press 2 or 3 repeatedly to select the letters printed on the key.

For IPv6, press the

For IPv4, press the

4. Press
5. On the Set static IP menu, press
Prefix for IPv6, and then press
Configuration Using the Phone Menus
You must be familiar with TCP/IP principles and protocols to configure static IP
settings.
.
to delete numbers.
Backspc
key to add a : symbol.
key to add a . symbol.
Save .
.
C620 Administrator and Provisioning Manual
 
to highlight Set static IP, and
or
 
to highlight Subnet Mask for IPv4 or
or
26
.
Back to Contents