Factory Reset the Base Station
1. Using a paperclip, or something similar, press and hold the reset button on the back of
the base station for 15 seconds.
2. Release the reset button. During the next one to two minutes, the following occurs:
The conference phone displays "Please wait".
The VoIP LED on the base station flashes quickly, then the Power LED and the
VoIP LED flash alternatingly.
The conference phone beeps once and displays "Out of range or no power at
base".
The status indicators on the conference phone flash red quickly.
The conference phone displays the idle screen. This indicates the factory reset has
completed.
Introducing the C620
C620 Administrator and Provisioning Manual
18
Back to Contents