Presetk -- Delete One Or All Presets; Presetl -- List All Commmands In A Preset - Polycom Vortex EF2210 Program Manual

Ping all connected device to determine the number, type, and ID of
***PING
the connected devices.

8.98. PRESETK -- Delete One or All Presets

This command kills (deletes) the specified preset. If a wildcard character (*) is used to specify the
preset, then all presets are deleted.
If an attempt is made to delete one of the factory presets (in the range 0-15), the PRESETK
command will fail and generate an ERROR#071. This is because the factory presets are read-only,
thus the cannot be changed or deleted.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example
Q01PRESETK18
Q01PRESETK*

8.99. PRESETL -- List All Commmands in a Preset

This command lists all the commands in a given preset. For example, assume that user preset 18 has
been defined previously by the following command.
Q01PRESETW18
Now, issuing the command:
Q01PRESETL18?
Will result in a long sequence of status mesages reflecting all the data stored in the preset. At the end
of the status messages, a final message of
Description
Delete preset number 18.
Delete all presets.
F00PONG
F01PONG
B02PONG
B03PONG
S04PONG
S05PONG
Q06PONG
Q07PONG
T00PONG
T01PONG
Status Message
Q01PRESETK18
Q01PRESETK*