Lagc -- Enable Or Disable Line Input Automatic Gain Control - Polycom Vortex EF2210 Program Manual

volatile memory, there will be a delay before an acknowledgment is returned.
Example
Q01LABELOB,Zone 2 Speaker
Q01LABELOB,?
8.55. LAGC -- Enable or Disable Line Input Automatic Gain
Control
This command sets or queries the status of the Automatic Gain Control (AGC) algorithm on input
channels A-B.
This command was introduced in firmware version 2.5.0.
This command is a channel boolean command. See
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Q01LAGCB1 Enable AGC on input channel B.
Q01LAGCA0 Disable AGC on input channel A.
Q01LAGCB2 Toggle AGC state on input channel B.
Q01LAGCA? Query AGC state on input channel A.
Q01LAGC*1 Enable AGC on input channels A-B.
Q01LAGC*0 Disable AGC on input channels A-B.
Toggle AGC state on input channels A-
Q01LAGC*2
B.
Query AGC state on input channels A-
Q01LAGC*?
B.
Description
Set label of output B
to "Zone 2 Speaker".
Query label for
output B .
Section 6.3
Status Message
Q01LAGCB1
Q01LAGCA0
Q01LAGCBx, where x is 0 or 1 depending on
the current state of the AGC on input channel
B.
Q01LAGCAx, where x is 0 or 1 depending on
the current state of the AGC on input channel
A.
Q01LAGC*11
Q01LAGC*0000
Q01LAGC*ab, where a and b are each 0 or 1
depending on the current state of the AGC for
each of the line input channels.
Q01LAGC*ab, where a and b are each 0 or 1
depending on the current state of the AGC for
each of the line input channels.
Status Message
Q01LABELOB,Zone 2 Speaker
Q01LABELOB,<string> , where
<string> is the current label assigned to
output B .
and Section 6.1 for more information