Polycom Vortex EF2210 Program Manual page 16

The following table is a list of the commands recognized by the EF2210 Detailed descriptions of each
command are given in the next section.
The Storage column contains one of the following values indicating when and where the parameter is
stored.
"Global"
"Preset"
"-" = not stored or not applicable
Globally stored parameters are not changed when a preset is executed. Only one copy of a global
parameter is stored. Global parameters are written to non-volatile memory each time they are
changed. Globally stored parameters retain their values when the power is cycled.
Parameters stored in presets are changed each time a new preset is restored/executed. Preset
parameters are not saved in non-volatile memory until a
stored in the power-on preset (see PRESETP) are restored when the power is cycled.
Command Storage Description
Global
ACKMOD
Preset
AEC
Preset
AECMODE
Preset
AGC
Preset
AGCMAX
Preset
AGCMIN
Preset
AGCRATE
Preset
AMASGN
Preset
AMAUTO
Preset
AMBUSID
Preset
AMCHAIR
Preset
AMCHNUM
Preset
AMDECAY
Preset
AMGATEC
Preset
AMGATER
Preset
AMGATET
Preset
AMGNOM
Preset
AMHOLD
Preset
AMLMM
Preset
AMLMN
Enable or Disable Acknowledgment Mode
Enable or Disable Acoustic Echo Cancellation
Set Amount of Double Talk Suppression used in the AEC.
Enable or Disable Mic/Line Input Automatic Gain Control
Set Maximum Allowed Mic/Line Input AGC Gain
Set Minimum Allowed Mic/Line Input AGC Gain
Set Ramp Rate of Mic/Line Input AGC
Assign Inputs to an Automixer
Select Automatic or Manual Gating for each Automixer Input
Set Automixer Groupings for EF Bus
Enable Chairman Mode for Specified Automixer
Set Chairman Mic
Set Decay Time for Automixers
Set Automixer Gating Control Mode
Set Automixer Gate Ratio
Set Automixer Gate Threshold
Set Global Maximum Number of Open Mics for Bus Automixer
Set Automixer Hold Time
Set Last Mic On Mode for Specified Automixer
Set Microphone That Will Remain On in Manual Last Mic On Mode
command is executed. Parameters
PRESETW