Amrefe -- Enable Automixer Reference For Specified Automixer - Polycom Vortex EF2210 Program Manual

number is not supported.
This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are 0 and 20,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set reference bias for automixer 1 to
Q01AMREFB16
6 dB.
Query current reference bias for
Q01AMREFB1?
automixer 1.
8.26. AMREFE -- Enable Automixer Reference for Specified
Automixer
This command enables, disables, or queries the automixer referece feature for the specified
automixer. When enabled, the automixer reference feature uses the AEC reference to prevent local
microphones from gating on audio from the remote side. The AMREFE command controls the enabled
status of this feature. The
the automixer even less likely to gate on remote audio.
The first argument in the command specifies the automixer number (always 1 on the EF2210) and
the second argument specifies whether automixer reference mode should be enabled, disabled,
toggled, or queried.
Even though this is a channel boolean command, use of the wildcard character for the automixer
number is not supported.
This command is a channel boolean command. See
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Disable automixer reference mode for
Q01AMREFE10
Automixer 1.
Enable automixer reference mode for
Q01AMREFE11
Automixer 1.
command can be used to bias the AEC reference signal to make
AMREFB
Section 6.3 and Section 6.2
Status Message
Q01AMREFB16
Q01AMREFB1x, where x is between 0 and
20 depending on the current setting of the
reference bias for automixer 1.
Section 6.3 and Section 6.1
Status Message
Q01AMREFE10
Q01AMREFE11
for more information
for more information