Amgatet -- Set Automixer Gate Threshold - Polycom Vortex EF2210 Program Manual

This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are 0 and 100,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set gate ratio for automatic
gating threshold to 12 dB for
Q01AMGATER112
input channel 1.
Increase gate ratio for automatic
gating threshold by 3 dB for
Q01AMGATER1>3
input channel 1.
Query gate ratio for automatic
gating threshold for input
Q01AMGATER1?
channel 1.

8.16. AMGATET -- Set Automixer Gate Threshold

This command sets the automixer gate threshold (in dB) for the specified input channel. The gate
threshold is the level that the input signal must reach in order to gate the microphone on. This value
us only used if the input is set to manual gating via the
This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are 0 and 100,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set gate threshold for manual
gating threshold to 12 dB for
Q01AMGATET112
input channel 1.
Section 6.3 and Section 6.2
Status Message
Q01AMGATER112
Q01AMGATER1x, where x is between 0 and
100 depending on the current setting of the
gate ratio for input channel 1. If this command
is issued after the example above, then the
status message will be Q01AMGATER115.
Q01AMGATER1x, where x is between 0 and
100 depending on the current setting of the
gate ratio for input channel 1. If this command
is issued after the example above, then the
status message will be Q01AMGATER115.
command.
AMAUTO
Section 6.3 and Section 6.2
Status Message
Q01AMGATET112
for more information
for more information