Gaino -- Set Output Gain - Polycom Vortex EF2210 Program Manual

on this type of command. The minimum and maximum values for this command are 0 and 20 or 30,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description Status Message
Set gain on
input A to 10
Q01GAINIA10
dB.
Query the
gain on
Q01GAINIA?
input A.
Set gain on
all inputs (1,
Q01GAINI*6
A, B) to 6
dB.
Set gain on
input
channels A
and B to 0
Q01GAINI*ìää
dB and gain
on input
channel 1 to
9 dB.
Query gain
on all inputs
Q01GAINI*?
(1, A, B) .

8.49. GAINO -- Set Output Gain

This command sets or queries the gain (in dB) of the three output channels (1, A, B) .
This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are -100 and 20,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set gain on output channel A to 10
Q01GAINOA10
dB.
Q01GAINIA10
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx,
where x is a number between 0 and 30, depending on the current
setting of the gain on input channel A.
Q01GAINI*èèè
Q01GAINI*ìää
S01GAINI*abc, where a-c are each between ä and ÿ, depending
on the current setting of the gains for each of the three input
channels.
Section 6.3 and Section 6.2
Status Message
Q01GAINOA10
for more information