Amlmn -- Set Microphone That Will Remain On In Manual Last Mic On Mode - Polycom Vortex EF2210 Program Manual

Disable "last mic on" mode for
Q01AMLMM10
automixer 1.
Set "last mic on" mode to manual for
Q01AMLMM11
automixer 1.
Set "last mic on" mode to automatic for
Q01AMLMM12
automixer 1.
Query the current setting of "last mic
Q01AMLMM1?
on" mode for automixer 1.
8.20. AMLMN -- Set Microphone That Will Remain On in
Manual Last Mic On Mode
This command sets the microphone number that will remain on when "last mic on" mode is set to
manual (see the
AMLMM
automixer (always 1 on the EF2210) that will be adjusted. The second argument is the microphone
number (always 1) that should be gated on if no other mics are gated on and
manual. The value of the AMLMN command is only valid when
This command is not particularly useful on the EF2210 since there is only one mic on this device.
However, it is provided in order to be consistent with the command sets of the other Vortex devices.
Even though this is a channel integer command, use of the wildcard character for the automixer
number is not supported.
This command is a channel integer command. See
on this type of command. The minimum and maximum values for this command are 1 and 8,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Set microphone 1 as the manual last
Q01AMLMN11
mic on for automixer 1.
Query the current manual last mic on
Q01AMLMN1?
number mic for automixer 1.
8.21. AMNOM -- Set Local Maximum Number of Open Mics
command). The first argument to this command is the number of the
Q01AMLMM10
Q01AMLMM11
Q01AMLMM12
Q01AMLMM1x, where x is 0, 1, or 2
depending on the current setting of "last
mic on" mode for automixer 1. If this
command is issued after the example
above, then the status message will be
Q01AMLMM12.
is set to manual.
AMLMM
Section 6.3 and Section 6.2
Status Message
Q01AMLMN11
Q01AMLMN1x, where x is always 1, since
there is only 1 mic on this device.
is set to
AMLMM
for more information