Label -- Set Or Query One Of The Device Labels - Polycom Vortex EF2210 Program Manual

front panel of the Vortex, so this command is not normally used. There are restrictions involving
having devices with the same ID linked on EF Bus -- see the Vortex Reference Manual for more
details.
This command is an integer command. See
command. The minimum and maximum values for this command are 0 and 7, respectively.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example Description
Change the device ID from 1 to 3
Q01ID3
Query current device ID.
Q01ID?

8.54. LABEL -- Set or Query one of the Device Labels

This command sets or queries one of the many labels stored in the device. The LABEL command has
the following syntax:
iLABELx,y
where i is the device type and ID, x is the label specifier, and y is the label text (to set the label) or
a ? character (to query the label). The label specifiers are as follows:
Label Specifier
D
SG
I1, IA, IB
O1, OA, OB
W, X, Y, Z
PB0-PB7, WB0-WB7, XB0-XB7, YB0-YB7,
ZB0-ZB7
PM0-PM1, WM0-WM2, XM0-XM2, YM0-
YM2, ZM0-ZM2
R1
P0-P47
M0-M255
The text of each label can be up to 16 characters long. Labels for presets 0-15 are read-only.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
Section 6.2 for more information on this type of
Description
A label for the device itself.
A label for the signal generator.
Labels for the input channels.
Labels for the output channels.
Labels for matrix outputs to EF Bus.
Labels for inputs from EF Bus to submatrices.
Labels for outputs from EF Bus submatrices to main
matrix.
Label for AEC reference.
Labels for user presets.
Labels for user macros.
Status Message
Q03ID3
Q01ID1