Mutegil -- Set Mute Status Of Line Inputs As A Group; Mutei -- Mute One Or More Inputs - Polycom Vortex EF2210 Program Manual

8.74. MUTEGIL -- Set Mute Status of Line Inputs as a
Group
This command sets the mute status of all the line inputs simultaneously. This is different from using a
wildcard, * with the
together, while the MUTEGIL sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is a boolean command. See
command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Q01MUTEGIL1 Mute all line inputs.
Q01MUTEGIL2 Toggle mute status of all line inputs.
Query the mute status of all the line
Q01MUTEGIL?
inputs.

8.75. MUTEI -- Mute One or More Inputs

This command sets or queries the mute status of the analog inputs (1, A, B) .
This command is a channel boolean command. See
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
command because that command sets all the mic and line inputs
MUTEI
Section 6.1 for more information on this type of
Status Message
Q01MUTEIA1
Q01MUTEIB1
Q01MUTEIAa
Q01MUTEIBb,
where a and b reflect the mute status (0 or
1) of each of the line inputs. If this
command was issued after the example
above, then the status messages would be:
Q01MUTEIA0
Q01MUTEIB0.
Q01MUTEIAa
Q01MUTEIBb,
where a and b reflect the mute status (0 or
1) of each of the line inputs. If this
command was issued after the example
above, then the status messages would be:
Q01MUTEIA0
Q01MUTEIB0.
Section 6.3 and Section 6.1 for more information