Mini -- Enable Modem Initialization String - Polycom Vortex EF2210 Program Manual

This command sets or queries the enabled state of the microphone gain stages on the microphone
input. Enabling the gain stage adds an extra 33 dB of gain in the input signal path. See the
description of the
GAINI
nominal input levels.
This command is a channel boolean command. See
on this type of command.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example Description
Enable microphone gain stage for input
Q01MIC11
channel 1.
Disable microphone gain stage for input
Q01MIC10
channel 1.
Toggle microphone gain stage for input
Q01MIC12
channel 1.
Query enabled status of microphone gain
Q01MIC1?
stage for input channel 1.

8.71. MINI -- Enable Modem Initialization String

This command controls whether or not the modem initialization string is sent at power-up. If MINI is
0, then the modem initialization string is not sent. If MINI is 1, then the modem initialization string is
sent. The text of the modem initialization string is set via the
This command is a boolean command. See
command.
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example Description
Q01MINI1 Enable modem initialization string.
Q01MINI0 Disable modem initialization string.
command for information on how the MIC and
Section 6.1
Section 6.3 and Section 6.1
Status Message
Q01MIC11
Q01MIC10
Q01MIC1x, where x is 0 or 1 depending
on the current enabled state of the
microphone gain stage on input channel
1.
Q01MIC1x, where x is 0 or 1 depending
on the current enabled state of the
microphone gain stage on input channel
1.
command.
MINISTR
for more information on this type of
Status Message
Q01MINI1
Q01MINI0
commands relate to
GAINI
for more information