Fppswd -- Change Front Panel Password; Gaingil -- Set Gain Of Line Inputs As A Group - Polycom Vortex EF2210 Program Manual

usage. The examples assume that the password has been set to 'aspi' (the default). The front panel
password can be changed via the
This command is saved to global non-volatile memory and is not part of a preset. Its value is saved
each time it is changed. It will retain its value after power-down. Since this command writes to non-
volatile memory, there will be a delay before an acknowledgment is returned.
Example
Q01FPLOCK1
Q01FPLOCK0,yumyum
Q01FPLOCK0,aspi
Q01FPLOCK?

8.46. FPPSWD -- Change Front Panel Password

This command sets or queries the front panel password. This password is used in conjunction with
the command. The front panel must be unlocked ('FPLOCK0') in order to use this command
FPLOCK
to set or query the front panel password. If the front panel is locked, then this command will result in
'ERROR#004'. The examples below assume that the front panel is unlocked.
Example
Q01FPPSWDmonkey
Q01FPPSWD?

8.47. GAINGIL -- Set Gain of Line Inputs as a Group

This command sets the gains of all the line inputs simultaneously. This is different from using a
wildcard, * with the
together, while the GAINGIL sets only the line inputs.
This command will generate acknowledgements from each of the line inputs separately.
This command is an integer command. See
command. The minimum and maximum values for this command are 0 and 20, respectively.
FPPSWD
Description
Lock the front panel to prevent
users from changing the settings.
Attempt to unlock the front panel
by using an invalid password
(yumyum).
Unlock the front panel by using
the correct password.
Query the locked status of the
front panel.
Description
Set front panel password to 'monkey'.
Query the current front panel password.
command because that command sets all the mic and line inputs
GAINI
command.
Status Message
Q01FPLOCK1
Q01ERROR#005 -- since an invalid
password was given, an error message
was generated. If error messages have
been disabled (via the
then no status message will be
generated.
Q01FPLOCK0
Q01FPLOCKx , where x is 0 or 1
depending on whether the front panel is
unlocked or locked, respectively.
Section 6.2 for more information on this type of
command),
ERROR
Status Message
Q01FPPSWDmonkey
Q01FPPSWDmonkey