Camera; Device Manager - Grandstream Networks GVC3200 Administration Manual

CAMERA


Move Speed
Set the camera movement speed when the camera is being adjusted. From slow to fast it can be set
to level 1 to level 16. Slow speed helps positioning precisely, while fast speed helps positioning
quickly.

Initial Position
Set the initial position of the camera when GVC3200/GVC3202 boots up.
 If set to "default", the camera will automatically rotate to the initial position, which means moving
to the center.
 If set to "Preset 1", the camera will rotate back to preset 1 when the device boots up.
 If set to "Latest position", the camera will rotate to the last position before reboot.
----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
Preset 1 is the camera position saved in preset configuration. For more details on preset, please refer to
chapter Preset in the GVC3200/GVC3202 User Guide.
----------------------------------------------------------------------------------------------------------------------------- ---------------

DEVICE MANAGER


Disable Missed Call OLED Indicator
If set to "Yes ", when the device has a missed call, the OLED on the front panel will not display
missed calls. The default setting is "No".

Disable MWI OLED Indicator
If set to "Yes ", when the device has an unread voice message, the OLED on the front panel will not
display messages. The default setting is "No".

Disable New Message OLED Indicator
If set to "Yes ", when the device has an unread message, the OLED on the front panel will not display
messages. The default

Disable Contact Full OLED Indicator
If set to "Yes ", when the device contacts is full, the OLED on the front panel will not display prompt.
The default setting is "No".
Firmware Version 1.0.1.48
www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
setting
is "No".
GVC3200/GVC3202 Administration Guide Page 28 of 71