Field Computers, Displays, And Control Consoles; Hydraulic Safety - Raven RS1 Installation Manual

Chapter 1
Be alert and aware of surroundings while operating this Raven system.
l
Determine and remain a safe working distance from obstacles and bystanders.
l
The operator is responsible for disabling the system when a safe working dis-
tance has diminished.
Do not operate the implement on any public road with this Raven system
l
enabled.
Maintain control of the vehicle at all times during operation. For example,
l
Remain in the operator seat while the system is enabled and disable auto-
l
mated Raven controls before exiting the operator seat.
Maintain control of safety devices such as E-Stops at all times during oper-
l
ation.
Disable this Raven system prior to starting any maintenance work on the imple-
l
ment or components of this Raven system.
Do not attempt to modify or lengthen any of the system control cables. Extension
l
cables are available from a local Raven dealer.

Field Computers, Displays, and Control Consoles

If the display will not be used for an extended period, it is best to remove the display
l
from the machine and store it in a climate controlled environment. This may help to
extend the service life of electronic components.
To prevent theft, secure the display and GNSS antenna when leaving the machine unat-
l
tended.

Hydraulic Safety

When installing or servicing a hydraulic system or hydraulic components, be aware that
hydraulic fluid may be extremely hot and under high pressure. Caution must be exercised.
Always wear appropriate personal protective equipment when installing or servicing
l
hydraulic systems.
Never attempt to open or work on a hydraulic system with the implement running.
l
Always take care when servicing or opening a system that has been pressurized.
l
2
WARNING