Raven RS1 Installation Manual page 53

With direcsteer

Hide thumbs Also See for RS1:

Table of Contents

18. Connect the field computer cable to the mating connectors on the back of the display.

Note:

Refer to System Diagrams for cable part numbers and refer to

https://ravenindustries.mcoutput.com/fieldcomp/en-us/Content/0-General/CRX_

DeviceOverview.htm

19. Once everything is installed and connected, hide the cabling behind the lining

whenever possible, and tie down the cabling where appropriate to avoid loose cabling.

for specific device connections.

Install RS1™ with DirecSteer

Table of Contents

Sc1