6.2.4.
External micro pressure probe
The following measurements can be performed using the external
micro pressure probe (0638 0330):
•
Ext-Draught
•
Ext-Delta-P Single meas.
•
Ext-Delta Program
•
Ext 4Pa-Measurement
version is selected)
•
Heating Check
selected)
See instruction manual for external micro pressure probe.
5.
6.2.5.
Average
This function is only available when the
selected.
Call up function:
✓ A flue gas probe or a multi-hole probe (0554 5762) is
connected.
>
[
Options:
>
[Options]
>
[Options]
is opened.
>
[Options]
>
[Options]
changed, start sensor detection manually.
To calculate the average, a series of 3 measurements are carried
out.
Averaging:
1. Position the flue gas probe in the centre of flow (area of the
highest flue gas temperature).
2. Start measurements
> First measurement:
> Second and third measurement:
-
The set measurement parameters, measurement period and
measured values are displayed.
-
A signal is sounded after 2 min (recommended measurement
period)
(only available if Germany country version is
→
]
Measurement options
→ Recalibrate: the gas sensors are set to zero.
→ Folders/Locations: the Folders/Locations folder
→ Fuels: select fuel.
→
Sensor
[
(only available if Germany country
Italy
→
[OK]
detection: once the probe has been
].
[OK]
6 Using the product
country version is
→
→ [OK].
Average
47