Industrial Electronic Devices
SET COMMUNICATION:
By Pressing the
"Set
Communication" button from the main window for SW67507
(Fig. 2) the window "Set Communication" appears (Fig. 3).
The window is divided in different sections in order to define the different
parameters of the converter:
Select Device
Ethernet Connection
Operation Mode
Modbus Master
Modbus TCP Slave
Wi-Fi
ADFweb.com S.r.l.
User Manual Modbus TCP Slave / Modbus Master
Document code: MN67507_ENG
Figure 3a: "Set Communication" window
Revision 2.400
Page 26 of 45