Speco NU Series Quick Setup Manual

Quick Setup Guide
Speco Technologies NU & N32NS Series NVRs
Please go to www.specotech.com/software-updates.html for the latest software
Congratulations
on purchasing your NU & N32NS.
We hope that this Quick Setup Guide will help you quickly setup
Thank you!
Product Components
NU & N32NS Series
Remote Control
Remote Battery 1.5V (AAA x 2EA)
Quick Setup Guide
Speco Technologies NS Series NVRs
Please go to www.specotech.com/software-updates.html for the latest software
Congratulations on purchasing your new NS NVR. Internal Connections EZ Network (Internet Connected) EZ Network (Not Connected to the Internet)
We hope that this Quick Setup Guide will help you quickly setup N4NS, N8NS, N16NS
Thank you! 4 5 6 7 10
Product Components 1 8 12 15
11 16
NS Series N4NSP
3
1 2 5 6 7 8 10 12
14 15 2. Select NO if the NVR is not using an internet connection. 1. Under EZ Setup, select EZ Network for Network Setup
N8NSP, N16NSP 11 13
Remote Control Remote Battery 1.5V (AAA x 2EA) 3
2 5 6 7 9 14 12 4. Click FINISH to save the setup. 3. Select OFF for ENABLE DDNS and click NEXT button.
1 8 10 14
11 13 15
1. Ground: Use for ground port. 2. PoE POWER: DC48V input. (NSP Models) EZ Camera
Quick Setup Guide Quick User Guide 3. PoE PORTS: N4NSP (4 Port PoE), N8NSP & N16NSP (8 Port PoE)
4. ETHERNET PORT2: Secondary Network Terminal.
5. AUDIO IN/OUT: 4 Connectors for Audio Input / (NS Series without PoE)
Mouse for D4RS / D8RS / D16RS 1 Connector for Audio Output.
6. CVBS OUT: HDMI output port. Connector to the HDMI Monitor.
7. HDMI OUT: Main Video Output (1280x720, 1920x1080). 8. VGA OUT: Connector for VGA Monitor.
Software & Manual CD 9. RS232C: POS Interface (TBD). 1. Under EZ Setup, select EZ Network for Network Setup
10. E-SATA: 1 External SATA Terminal. 2. Select YES if the NVR is using an internet connection.
Rack mounts ears (x 2EA) 11. USB PORT: USB Ports for Mouse or USB Flash Drive . (STATIC) and then click TEST button. It will automatically
Screws (x 6EA) 12. ETHERNET PORT1: RJ-45 Connector for Primary Network. 13. Audio 5~16: More audio inputs for N8NSP, N16NSP. setup the network setting for the system (NVR).
Adaptors (DC12V 5A, DC48V 2A) 14. SENSOR IN, ALARM OUT, RS-485: 4 sensor inputs; 4. Setup DDNS setting. DDNS (Dynamic Domain Name System) allows a DNS name to be constantly synchronized
& Power cables (110V or 220V) 1 alarm output and RS-485 for PTZ. with a dynamic IP address. It allows using a dynamic IP address to be 1. In the EZ Setup window, select EZ Camera for Date/Time and
15. POWER: DC12V input for NVR. associated with a static domain name. Refer to the full version manual Camera Setup and click on NEXT.
Power on the DVR EZ Setup 5.Click FINISH to save the setup. for more information. 3. Setup the DATE DISPLAY FORMAT, DAYLIGHT SAVINGS and
• Please follow the proper power on procedures • To start the EZ Setup, right click on the mouse and select DATE & TIME.
to avoid damaging the NVR. EZ SETUP from the submenu. 4. Click on NEXT to enter the EZ Camera Setup.
• Connect all necessary components, e.g. monitor and cameras, before powering the NVR. The default username is admin and password is 1111. • Enter username and password. 6. Click on SCAN to search the network for cameras. 5. Select the IP Camera VENDOR
• Check the type of power source before connecting the power adaptor • It is strongly suggested to change the password to 7. Once the IP Camera information is added for the channel, click on
to the NVR. Only use the power supply that is included with the unit. prevent unauthorized access. PREVIEW to verify video
• It is recommended that the Adaptors are connected to the NVR before powering up unit. 8. Click OK and EZ Camera Setup has completed.
Rev. 5/21/13
Quick Setup Guide User Guide
Mouse for N8NU, N16NU and N32NS
Software & Manual CD
Rack mounts ears (x 2EA)
Screws (x 6EA)
Adaptors (DC12V 6.67A for N32NS),
Power cables (110V or 220V)
Power on the NVR
• Please follow the proper power on procedures
to avoid damaging the NVR.
• Connect all necessary components, e.g. monitor and cameras,
before powering the NVR.
• Check the type of power source before connecting the power adaptor
to the NVR. Only use the power supply that is included with the unit.
• It is recommended that the Adaptors are connected to the
NVR before powering up unit.
Internal Connections
N8NU
N16NU
1. Ground: Use for ground port.
2. POWER: Power Input (AC 100~240V)
3. PoE PORTS: 8/16 Port PoE
4. AUDIO IN/OUT: Connectors for Audio Input / Connector for Output.
5. CVBS OUT: TV out port. Connector to the TV Monitor.
6. HDMI OUT: Main Video Out (Max. 3840x2160)
7. VGA OUT: Connector for VGA Monitor (Max. 1920x1080)
8. E-SATA: 1 External SATA Terminal.
9. USB PORT: USB Ports for Mouse or USB Flash Memory.
10. ETHERNET PORT: RJ-45 Connector for Primary Network.
11. SENSOR IN, ALARM OUT, RS-485: 4 Sensor Inputs, 1 Alarm
Output and RS-485 for PTZ
12. POWER SWITCH
N32NS
1. Ground: Use for ground port.
2. IP CAMERA: Network Terminal for IP Camera, No Internet Access.
3. CVBS OUT: TV out port. Connector to the TV Monitor.
4. HDMI OUT: Main Video Out (Max. 3840x2160)
5. VGA OUT: Connector for VGA Monitor (Max. 1920x1080)
6. AUDIO IN/OUT: Connectors for Audio Input / Connector for Output.
7. E-SATA: 1 External SATA Terminal.
8. USB PORT: USB Port for Moue or USB Flash Memory.
9. ETHERNET PORT: RJ-45 Connector for Primary Network.
10. SENSOR IN, ALARM OUT, RS-485: 4 Sensor Inputs, 1 Alarm
Output and RS-485 for PTZ
11. POWER: DC 12V 6.67A Input
EZ Setup
• To start the EZ Setup, right click on the mouse and select
EZ SETUP from the submenu.
• Enter username and password.
The default username is admin and password is set on the first booting.
• It is strongly suggested to change the password to
prevent unauthorized access.
EZ Network Setup
1. Under EZ Setup, select EZ Network for Network Setup
2. Select NEXT if the NVR is using an internet connection.
3. NVR automatically tries to test and detect a network environment.
4. Select Auto Con guration(DHCP) and then click TEST button.
It will automatically setup the network setting for the NVR.
5. Setup DDNS setting. DDNS (Dynamic Domain Name System)
allows a DNS name to be constantly synchronized
with a dynamic IP address. It allows using a dynamic IP address to be
associated with a static domain name. Refer to the full version manual
for more information.
6.Click FINISH to save the setup.
EZ Network Setup
continued
EZ Setup for Date/Time and Camera
1. In the EZ Setup window, select EZ Camera for Date/Time and
Camera Setup and click on NEXT.
3. Setup the DATE DISPLAY FORMAT, DAYLIGHT SAVINGS and
DATE & TIME.
4. Click on NEXT to enter the EZ Camera Setup.
5. Select the IP Camera VENDOR
6. Click on SCAN to search the network for cameras.
7. Once the IP Camera information is added for the channel, click on
PREVIEW to verify video
8. Click OK and EZ Camera Setup has completed.
Rev. 10/31/18