Table of Contents
Advertisement
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front operator panel
Use this procedure to install the front operator panel.
Before installing the front operator panel:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
To install the front operator panel, complete the following steps:
Step 1.
Align the panel with the slot on operator panel tray assembly, and slide it in until it clicks into place.
Figure 88. Front operator panel installation
After installing operator panel tray assembly, complete the following steps:
1. Reinstall the operator panel tray assembly (see
PCIe riser-card assembly and adapter replacement
Use this procedure to remove or install the PCIe riser-card assembly and the adapters.
Remove the PCIe riser-card assembly
Use this procedure to remove the PCIe riser-card assembly.
Before removing the PCIe riser-card assembly:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Power off the server" on page
3. If the server is installed in a rack, slide the server out on its rack slide rails to gain access to the top
cover, or remove the server from the rack.
55).
55).
11).
"Safety" on page iii
"Install the operator panel tray assembly" on page
"Safety" on page iii
.
Chapter 3
and
"Installation
and
"Installation
Hardware replacement procedures
90).
93
Advertisement
Table of Contents
