Control Modes; One Eventspot (Manual); One Eventspot (Auto Program); One Eventspot (Built-In Programs) - SHOWTEC 44050 Manual

Table of Contents

Advertisement

EventSpot 1600 Q4
Important!
Do not charge for more than 24 hours.
Recharge within 3 days of use.
Press the power button (05) at the bottom of the device to off position, when storing for more than 7
days.
Store in an upright position.

Control Modes

There are 6 modes:

One EventSpot (Manual)

When the EventSpot is not connected with a DMX cable and Wireless DMX is switched off, it functions as
a stand-alone device. See page 20 for more information about Manual mode.

One EventSpot (Auto program)

When the EventSpot is not connected by a DMX cable and Wireless DMX is switched off, it functions as a
stand-alone device. See page 20 for more information about Auto program.

One EventSpot (Built-in programs)

When the EventSpot is not connected by a DMX cable and Wireless DMX is switched off, it functions as a
stand-alone device. See pages 20–21 for more information about Built-in programs.
Ordercode: 44050
Manual (stand alone)
Auto program (stand alone)
Built-in programs (stand alone)
Master/Slave
DMX-512
Wireless DMX (W-DMX)
11
Fig. 04

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eventspot 1600 q4 v2

Table of Contents