Multiple Eventspots (Wireless Dmx Control) - SHOWTEC 44050 Manual

EventSpot 1600 Q4

Multiple EventSpots (Wireless DMX Control)

01) Place the EventSpots at the desired position (see page 15 for maximum WiFi distance).
02) When the W-DMX LED indicator (C) is blinking (green), the device is searching for a connection.
03) Connect the transmitter with multiple EventSpots. In order to create a Wireless match, please check
the manual of your wireless signal transmitter.
04) When there is a connection, the W-DMX LED indicator (C) from the EventSpot will light up green.
05) Use a DMX-cable to link the transmitter with a suitable lightcontroller.
Setup example wireless DMX
Fig. 07
Ordercode: 44050
14