Table of Contents
Advertisement
EventSpot 1600 Q4
2. Manual
In this menu you can set the static colors.
01) In main menu, press the UP/DOWN buttons until the display shows Manual.
02) Press the SET button to open the menu. The display will show:
03)
Press the UP/DOWN buttons to scroll through the static colors: Red, Green, Blue and White.
04)
Press the SET button to proceed.
05)
Press the UP/DOWN buttons to set the color intensity. The adjustment ranges are as follows:
3. Auto program
In this menu you can activate Auto program.
01) In main menu, press the UP/DOWN buttons until the display shows Auto.
02) Press the SET button to open the menu. The display will show:
03) Press the UP/DOWN buttons to choose between Yes or No.
04) If you choose Yes, the EventSpot will start the auto program.
05) If you choose No, the EventSpot will black out the output.
06) Press the SET button to confirm your choice.
4. Built-in programs
In this menu you can set the built-in programs.
01) In main menu, press the UP/DOWN buttons until the display shows Program.
02) Press the SET button to open the menu. The display will show:
03) Press the SET button to open the menu and press the UP/DOWN buttons to choose one of the built-in
programs. The adjustment range is between 01–16.
04) If you have chosen
strobe frequency.
05) If you have chosen color
06) Press the UP/DOWN buttons to choose one of the 33 preset colors.
07) If you have chosen strobe frequency
08) Press the UP/DOWN buttons to set the desired strobe frequency. The adjustment range is between 0–
Ordercode: 44050
Red
Green
Blue
White
, press the UP/DOWN buttons to choose the desired color or set the
, press the SET button to open the submenu.
, press the SET button to open the submenu.
20
Advertisement
Table of Contents
