Table of Contents
Advertisement
6.
Operation
6.1.
Safety Instructions for Operation
Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a stage blinder. It can be installed indoors and outdoors. This
device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency match
the input voltage, current and frequency specified on the information label on the device.
6.2.
Control Modes
The Stage Blinder FLEX Blaze supports the following control modes:
•
•
Stand-alone:
Auto operation mode, built-in programs, manual operation
•
•
Master/Slave:
Auto operation mode, built-in programs, manual operation
•
•
DMX-512:
Basic (4 channels), Basic Strobe (5 channels), Custom (5 channels), Pixel (32 channels),
Pixel Strobe (33 channels), Pixel Custom (40 channels), Tungsten (8 channels).
For more information about how to connect the devices, refer to Setup (see
To operate the device manually as a stand-alone device or in a master/slave setup:
Adjust the colors in the Manual Mode (see
To run the built-in program or auto mode without a DMX controller:
Select the control mode of the device in the main menu.
•
•
If you select Auto (see
•
•
If you select Program (see
can edit the programs in the Program menu.
To operate the device with a DMX controller:
01) Select DMX512 as control mode in the DMX (see
01)
02)
02) Set the DMX starting address (see
menu (see
6.6.1.1. DMX Address
03)
03) Select the DMX channel mode in the DMX channel mode menu (see
25). Refer to DMX channels (see
channels.
c
6.6.2. Manual Mode
6.6.4. Auto
on page 28), the device will run the built-in program.
6.6.5. Program
on page 28), the device will run the respective program. You
5.3.4. DMX Addressing
on page 25).
6.7. DMX Channels
on page 26) menu.
6.6.1. DMX
on page 25) Menu.
on page 19) of the device in the DMX Address
6.6.1.2. DMX Channel Mode
on page 33) for a complete overview of all DMX
20
Stage Blinder FLEX Blaze
5. Setup
on page 17).
Product code: 30785
on page
Advertisement
Table of Contents
