Related Manuals for SHOWTEC EventDOT 15 Q4
Summary of Contents for SHOWTEC EventDOT 15 Q4
- Page 1 USER MANUAL ENGLISH EventDOT 15 Q4 Product code: 44011 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
- Page 2 EventDOT 15 Q4 Preface Thank you for purchasing this Showtec product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
-
Page 3: Table Of Contents
EventDOT 15 Q4 Table of contents Introduction ................................4 Before Using the Product ..........................4 Intended Use ............................... 4 Product Lifespan ..............................4 LEDs Lifespan ............................... 4 Text Conventions ..............................4 Symbols and Signal Words ..........................5 Symbols on the Information Label ........................5 Safety .................................. - Page 4 EventDOT 15 Q4 Functions of the Remote Control Buttons ....................24 Operation Modes ............................24 Auto Mode ............................25 Built-in Programs ..........................25 Static Colors ............................25 Dimming Mode ...........................25 Control via the Web Interface ........................26 Wi-Fi Setup ..............................26 Setup Devices .............................27 Auto Mode ............................27 Built-in Programs ..........................28...
-
Page 5: Introduction
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● Showtec EventDOT 15 Q4 ● AC power adapter ● 15° diffuser ●... -
Page 6: Symbols And Signal Words
EventDOT 15 Q4 Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury. -
Page 7: Safety
EventDOT 15 Q4 Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions... - Page 8 EventDOT 15 Q4 WARNING Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. Attention Power supply Before connecting the AC power adapter to the power supply, make sure that the current, voltage and frequency match the input voltage, current and frequency specified on the information label on the AC power adapter.
-
Page 9: Requirements For The User
EventDOT 15 Q4 Attention Do not expose the device to conditions that exceed the rated IP class conditions. The front part of the device with the lens is IP54 rated. The back part of the device with the magnet is IP20 rated. -
Page 10: Description Of The Device
Description of the Device The Showtec EventDOT 15 Q4 is a compact battery-powered LED spot. It can be used for stage lighting and it is suitable for corporate and private events. The EventDOT 15 Q4 can be controlled manually, via Wi-Fi and via a remote control. -
Page 11: Product Specifications
EventDOT 15 Q4 Product Specifications Model: EventDOT 15 Q4 Electrical: Input voltage: 8,4–9 V DC Power consumption: 20 W Physical: Dimensions: 143 x 101 x 81 mm (L x W x H) Weight: 0,8 kg (with mounting bracket, without accessories) -
Page 12: Dimensions
EventDOT 15 Q4 Dimensions Fig. 06 Fig. 07 Fig. 08 Product code: 44011... -
Page 13: Installation
EventDOT 15 Q4 Installation Safety Instructions for Installation WARNING Incorrect installation can cause serious injuries and damage of property. If trussing systems are used, installation must be carried out only by instructed or skilled persons. Follow all applicable European, national and local safety regulations concerning rigging and trussing. - Page 14 EventDOT 15 Q4 The different mounting options are as follows: Option 1: upright installation Swivel the mounting support (04) at 90°. Place the device on a flat surface, as shown in Fig. 09. Adjust the angle of the device with the 2 adjustment screws (06).
-
Page 15: Diffuser Installation
Fig. 14 Diffuser Installation The EventDOT 15 Q4 is delivered with 3 diffusers: 15°, 30°, and a dome diffuser. To install the diffuser, follow the steps bellow: 01) Place the diffuser above the lens (02), so that the 3 wings of the diffuser will fit into the 3 cut-outs for diffusor installation (03) on the device, as shown in Fig. -
Page 16: Charging The Battery
EventDOT 15 Q4 Charging the Battery DANGER Risk of explosion caused by incorrect handling This device contains a built-in rechargeable lithium-ion battery. The battery is not replaceable. The battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures. -
Page 17: Setup
Setup Stand-alone Setup When the EventDOT 15 Q4 is not connected to a controller or to other devices, it functions as a stand- alone device. It can be operated manually or with an infrared (IR) remote control. For more information about the control modes, refer to 6.5. Control Modes on page 20. -
Page 18: Wi-Fi Led Indicator Statuses
It supports up to 63999 universes and uses multicasting. DMX Addressing In a setup with multiple devices, make sure that you set the DMX starting address of each device correctly. The EventDOT 15 Q4 has 6 personalities: 1, 2, 4, 5, 6, and 9 channels. Product code: 44011... -
Page 19: Universe Numbering
Continue assigning the starting addresses of the remaining devices by adding each time 9 to the previous number. Make sure that you do not have any overlapping channels in order to control each EventDOT 15 Q4 correctly. If two or more devices are addressed similarly, they will work similarly. -
Page 20: Operation
EventDOT 15 Q4 Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is designed to be used as a professional light effect suitable for stage lighting, corporate and private events. -
Page 21: Control Modes
EventDOT 15 Q4 Control Modes The EventDOT 15 Q4 can be controlled manually, via infrared (IR) remote control, and via Wi-Fi. The table below shows the different control options and the available features for each control mode. Wi-Fi Manual IR Remote... -
Page 22: Battery Status Check
EventDOT 15 Q4 Battery Status Check If the device is not running, press the button and release it within 1 second to see the battery status. If all 4 battery indicator LEDs (01) are on – the battery is fully charged. If only LED 1 and LED 2 are on –... -
Page 23: Built-In Programs
EventDOT 15 Q4 Built-in Programs In this operation mode the device plays the selected built-in program. Press the manual control button (10) and release it within 1 second to go to the next built-in program. There are 15 built-in programs available: 8 color jump programs and 7 color fade programs. The sequence of the built-in programs is as follows: ●... -
Page 24: Remote Control
EventDOT 15 Q4 Remote Control The device can be controlled with an IR remote control. The remote control (product code: 44002) is not included in the delivery. You can purchase the remote control with any Highlite International dealer. DANGER Do not ingest battery, chemical burn hazard The remote control contains a coin cell battery. -
Page 25: Functions Of The Remote Control Buttons
EventDOT 15 Q4 Functions of the Remote Control Buttons The remote control has the following functions: Button Description Function Activates the red color Green Activates the green color Blue Activates the blue color Amber Activates the amber color White Activates the white color... -
Page 26: Auto Mode
EventDOT 15 Q4 Auto Mode Press the AUTO button to activate the auto operation mode. The device will play the built-in programs continuously. Built-in Programs In this mode you can select one of the built-in programs. Press the PROGRAM button to activate the built-in programs mode. -
Page 27: Control Via The Web Interface
EventDOT 15 Q4 Control via the Web Interface You can control the device and configure its settings via the web interface. You can access the web interface from the Internet browser on your computer/laptop. To access the web interface, follow the steps bellow: Connect the device to the computer/laptop. -
Page 28: Setup Devices
EventDOT 15 Q4 Setup Devices In this section you can select the control mode of the device and change the name of the device. From the dropdown menu in the Control Mode field you can select the control mode of the device. The following options are available: ●... -
Page 29: Built-In Programs
EventDOT 15 Q4 Built-in Programs Select Program from the dropdown menu in the Control Mode field. Select the built-in program from the dropdown menu in the Program field. There are 15 built-in programs available: 8 color jump programs and 7 color fade programs. -
Page 30: Static Colors
EventDOT 15 Q4 Static Colors Select Static from the dropdown menu in the Control Mode field. Select the color from the dropdown menu in the Color field. There are 15 static color presets available: 1. Red 4. White 7. Yellow 10. -
Page 31: Dmx Mode
EventDOT 15 Q4 DMX Mode Select DMX from the dropdown menu in the Control Mode field. Select the control protocol in the DMX Input field. There are 2 options available: ● Art-Net: See 6.8.3. Art-Net Configuration on page 31 for more information ●... -
Page 32: Art-Net Configuration
EventDOT 15 Q4 Art-Net Configuration This section on the web interface is visible only if you have selected Art-Net in the DMX Input field. See 6.8.2.5. DMX Mode on page 30 for more information. Enter the universe value in the Universe field. The entry range is 0–127. -
Page 33: Control Via The Mobile App
EventDOT 15 Q4 Control via the Mobile App You can control the device and configure its settings via a mobile app on your smartphone. The mobile app ColorCue is available for both Android and Apple devices. You can download the app from the Play Store (Android) or the App Store (Apple). -
Page 34: Setup Devices
EventDOT 15 Q4 The app has the following buttons: Drop-down menu button Click this button to open a drop-down menu in the settings Numeric pad button Click this button to open the numeric pad Keyboard button Click this button to open the virtual keyboard... -
Page 35: Auto Mode
EventDOT 15 Q4 Note: The name of the device in the Name field is set to ‘EventDot’. You can change the name of the device in this field. Click the Keyboard button to open the keyboard and enter a new name. -
Page 36: Static Colors
EventDOT 15 Q4 Static Colors Select Static from the dropdown menu in the Control field. Select the color from the dropdown menu in the Static field. There are 15 static color presets available: 1. Red 6. Orange 11. Light red 2. -
Page 37: Wi-Fi Setup
EventDOT 15 Q4 Wi-Fi Setup In this section you can connect the device to the router: Enter the SSID name of the router in the SSID field. Enter the password of the router in the Password field. Click Save WiFi to save the changes and complete the Wi-Fi setup. - Page 38 EventDOT 15 Q4 Click the Dimmer Values section on the ribbon menu at the bottom of the screen. Select the device you want to control from the list with added fixtures. Select a color with the Color Picker in the Picker tab. You can use alternatively the sliders in the Faders tab to adjust the values for red, green, blue, and white separately.
-
Page 39: Dmx Channels
EventDOT 15 Q4 DMX Channels DMX Channels Overview Function 1 CH 2 CH 4 CH 5 CH 6 CH 9 CH Master Dimmer Linear Strobe Color Presets Built-in Programs Speed Green Blue White 1 Channel, 2 Channels 1 CH 2 CH... -
Page 40: Channels, 5 Channels, 6 Channels, 9 Channels
EventDOT 15 Q4 1 CH 2 CH Function Value Setting 064–079 Color jump 4 R / W / R / B 080–095 Color jump 5 Blue / White Flash / Red / White Flash 096–111 Color jump 6 Magenta / White / Green / White 112–127... -
Page 41: Troubleshooting
EventDOT 15 Q4 4 CH 5 CH 6 CH 9 CH Function Value Setting 231–255 Color 33 R 255; G 255; B 255; W 255 000–015 No function 016–031 Color jump 1 R / G / B / W / Y / C / M/ W 032–047... -
Page 42: Maintenance
EventDOT 15 Q4 Maintenance Preventive Maintenance Attention Before each use, examine the device visually for any defects. Make sure that: ● All screws used for installing the device or parts of the device are tightly fastened and are not corroded. -
Page 43: Instructions For Transportation
Approval Hereby, Highlite International declares that the device EventDOT 15 Q4, product code 44011, is in compliance with Directive 2014/53/EU (RED – Radio Equipment Directive). The full text of the EU declaration of conformity is available at the respective product page on the website of Highlite International (www.highlite.com). - Page 44 ©2021 Showtec...