Table of Contents
Advertisement
Stellar FZ-1000 Fazer
Put the fluid tank back in the device, as shown in Fig. 18.
Screw the lid back on the fluid tank, as shown in Fig. 19.
Notes:
Do not allow the fog liquid to become contaminated. Always replace the caps on the fog liquid
container and the fog machine liquid tank immediately after filling.
Restarting the Device after Running the Tank empty
When running a tank completely empty, the pump will automatically stop fogging to prevent damage to
the pump. The display will blink and show:
If you refill the tank and try to operate the device, the display will keep displaying this Warning
message.
Make sure you fill the entire tank, let the device reheat and then manually start fogging.
This will take a few seconds until the completely emptied lines are filled with fog fluid.
Control Modes
The Stellar FZ-1000 Fazer supports the following control modes:
●
Manual (fog intensity/volume, fan speed)
●
Manual via Remote control
●
2 DMX channels
For more information about how to connect the devices, refer to 5. Setup on pages 17–19.
Product code: 61114
Fig. 18
24
Fig. 19
Advertisement
Table of Contents
