Operation; Safety Instructions For Operation; Control Modes - SHOWTEC ACT Profile 50 RGBAL User Manual

Hide thumbs Also See for ACT Profile 50 RGBAL:
Table of Contents

Advertisement

ACT Profile 50 RGBAL
6.

Operation

Safety Instructions for Operation

Attention
This device must be used only for the purposes it is designed for.
This device is intended for use as a professional theater spotlight and is suitable for indoor use only. This
device is not suitable for households or general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.

Control Modes

The ACT Profile 50 RGBAL can be operated with a DMX controller and as a stand-alone device.
The ACT Profile 50 RGBAL supports the following control modes:
DMX-512:
Stand-alone:
For more information about how to connect the devices, refer to 5. Setup on pages 20–22.
To operate the device with a DMX controller:
You can operate the device manually as a stand-alone device in 2 ways:
from the control panel and the menu
with the Manual dimmer / Preset Color control (19). See 6.6.2.1. Function Mode on page 29 for more
information.
To operate the device manually from the control panel and the menu:
Select Manually Defined in the Mode pop-up submenu. See 6.6.2.1. Function Mode on page 29 for
more information.
Adjust the dimmer and shutter values in the Manually Defined submenu. See 6.7. Manual Operation
on page 32 for more information.
To operate the device with a DMX controller:
Set the DMX starting address of the device in the DMX Address menu. See 6.6.1.1. DMX Address on
page 27 for more information.
Select the behavior of the device in case there is no DMX signal in the DMX Fail pop-up submenu.
See 6.6.1.3. DMX Fail on page 28.
Select the DMX channel mode in the DMX channel mode menu. See 6.6.1.2. DMX Channel Mode on
page 28 for more information. See 6.8. DMX Channels on pages 33
channels.
Product code: 34033
5, 8 and 12-channel mode
Manual and remote operation
for complete overview of all DMX
–34
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

34033

Table of Contents