Operation; Safety Instructions For Operation; Control Modes - SHOWTEC Cameleon Spot 7 Q6 V1 User Manual

Table of Contents

Advertisement

Cameleon Spot 7 Q6
6.

Operation

Safety Instructions for Operation

Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as an outdoor wall washer. It is not suitable for households and
for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.

Control Modes

The Cameleon Spot 7 Q6 can be operated with a DMX controller, or without a DMX controller as a stand-
alone device or in a master/slave setup.
The Cameleon Spot 7 Q6 supports the following control modes:
Stand-alone:
Master/Slave:
DMX-512, RDM
For more information about how to connect the devices, refer to 5. Setup on pages 17–19.
To operate the device manually as a stand-alone device or in a master/slave setup:
Adjust the colors in Manual menu. See 6.6.2. Manual Mode on page 25 for more information.
To run the built-in programs without a DMX controller:
01) Select one of the 16 built-in programs in Program menu. See 6.6.4. Program on page 26 for more
information. Adjust the program speed and strobe frequency.
Run all built-in programs in a sequence in Auto menu. See 6.6.3. Auto on page 26 for more
information.
To run the preset colors without a DMX controller:
Select one of the 33 preset colors in Program menu. See 6.6.4.1. Program 01 on page 27 for more
information.
To operate the device with a DMX controller:
01) Set the DMX starting address of the device in Address menu. See 5.3.5. DMX Addressing on page 19
and 6.6.1.1. Address on page 25.
02) Select the DMX channel mode. See 6.6.1.2. Channels on page 25 for more information. See 6.7. DMX
Channels on pages 33–34 for complete overview of all DMX channels.
Product code: 42665
Manual, Auto, Built-in programs
Manual, Auto, Built-in programs
6, 8, 13 channels
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

42665

Table of Contents