Auto Program; Built-In Programs; Manual Mode - SHOWTEC 44050 Manual

EventSpot 1600 Q4
No function
Warm white

Auto program

01) Press the button to activate Auto program.
02) The device will start its Auto program.

Built-in programs

01) Press the button to activate Built-in programs mode.
02) Press the and
03) If you choose program 01, you can set the desired color preset with the buttons
04) Press the button to set the strobe frequency of the preset colors.
05) Press the and
between 0–15 Hz, from OFF to high strobe frequency.
06) If you choose programs 02–16, you can set the program speed and strobe frequency.
07) Press the button to set the program speed.
08) Press the and
between 01–100, from slow to fast.
09) Press the button to set the strobe frequency.
10) Press the and
between 0–15 Hz, from OFF to high strobe frequency.

Manual mode

01) Press the button to activate Manual mode.
02) Press the , ,
03) Press the and
04) In this mode you can create your desired color.
Ordercode: 44050
Blue Activates Blue color
White Activates White color
Green Activates Green color
Purple Activates Purple color
Purplish red Activates Purplish Red color
Orange Activates Orange color
White Activates White color
Bright pink Activates Bright Pink color
Light green Activates Light Green color
Water blue Activates Water Blue color
Yellow Activates Yellow color
Activates Warm White color
buttons to choose one of the programs 01–16.
buttons to increase/decrease the strobe frequency. The adjustment range is
buttons to to increase/decrease the program speed. The adjustment range is
buttons to increase/decrease the strobe frequency. The adjustment range is
or button to choose one of the RGBW colors.
buttons to set the intensity of the individual colors between 0–255.
26
– .