Table of Contents
Advertisement
Performer Profile Mini MKII 5600K
Control Modes
There are 2 modes:
Manual Dimmer (Control)
01) Fasten the effect light to a firm trussing. Leave at least 0,5 meter on all sides for air circulation.
02) Always use a safety cable (ordercode 70140 / 70141).
03) Plug the end of the electric mains power cord into a proper electric power supply socket.
04) Turn the manual dimmer control (07) on the Performer to set the brightness. The adjustment range is
between 10–100, from dark to brightest.
Manual Dimmer Setup
Manual mode will be active ONLY if the Performer DOES NOT receive any DMX signals.
Ordercode: 33091
●
Manual Dimmer
●
DMX-512/RDM
11
Fig. 08
Advertisement
Table of Contents
