Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 92

Table of Contents

Advertisement

Additional F.A.S.T.-keys
To add a F.A.S.T.-key, you must already have
2 registered F.A.S.T.-keys. You need to regis-
ter the ID code to the vehicle.
Registering the ID code can be done by your
authorized Mitsubishi Motors dealer. Or it
can be done by yourself.
For you to register the ID code yourself, fol-
low the "Customer F.A.S.T.-key program-
ming" procedure below.
If you choose to have your authorized
Mitsubishi Motors dealer register the ID
code, take your vehicle and all remaining
F.A.S.T.-keys to your authorized Mitsubishi
Motors dealer.
NOTE
 You are provided with 2 F.A.S.T.-keys, but
you may register up to 4 F.A.S.T.-keys.
You can obtain blank F.A.S.T.-keys for your
vehicle from your Mitsubishi Motors dealer.
Customer F.A.S.T.-key program-
ming
You can program new F.A.S.T.-keys to the
system if you have two valid (already regis-
tered) F.A.S.T.-keys and blank (not regis-
tered) F.A.S.T.-key.
Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)
For F.A.S.T.-key programming, follow the
procedures below.
N00561101109
1. Open the driver's door.
NOTE
 Keep the driver's door open until F.A.S.T.-
key programming is finished. Do not open or
close other doors.
2. While carrying the first valid F.A.S.T.-
key, put the operation mode in ON. (Per-
form the following procedure within 30
seconds.)
3. Insert the new F.A.S.T.-key into the key
slot.
4. With the first valid F.A.S.T.-key, press the
N00561201331
UNLOCK button for 4 to 8 seconds and
press the LOCK button during this time.
5. Release in sequence the LOCK and
UNLOCK buttons within 8 seconds of
pressing the LOCK button in step 4. (Per-
form the following procedure within 30
seconds.)
6. With the second valid F.A.S.T.-key, press
the UNLOCK button for 4 to 8 seconds
and press the LOCK button during this
time.
7. Release in sequence the LOCK and
UNLOCK buttons within 8 seconds of
pressing the LOCK button in step 6. The
immobilizer warning light will blink.
When registration of ID code is complete,
the buzzer will sound 3 times and the
immobilizer indicator will come on for 30
seconds.
If an error occurs, F.A.S.T.-key program-
ming will be terminated and the buzzer
will sound for 3 seconds.
NOTE
 F.A.S.T.-key programming will be termi-
nated if the operation mode is put in OFF
before the immobilizer warning light starts
blinking.
Features and controls
5
5-21

Advertisement

Table of Contents
loading

Table of Contents