Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 51

Table of Contents

Advertisement

Child restraint systems
from normal Emergency Locking Retractor
(ELR) mode, to Automatic Locking Retractor
(ALR) mode. This means that when you pull
the seat belt fully out of the retractor, the
retractor will switch to its ALR child restraint
installation function. Always use the ALR
4
child restraint installation function when you
install a child restraint system using the seat
belt.
Children 12 years old and under should
always be restrained in the rear seat, when-
ever possible, although the front passenger
seat belt can also be converted to ALR mode.
WARNING
 When you install a child restraint system
using the seat belt, always make sure the
retractor has been switched to the ALR
child restraint installation function. The
ALR function will keep the child restraint
system tightly secured to the seat.
Failure to convert the retractor to the
ALR function may allow the child
restraint system to move forward during
sudden braking or an accident, resulting
in serious injury or death to the child or
other occupants.
4-22
Seat and restraint systems
WARNING
 Never remove the buckle (A) for the rear
center seat from the rubber belt (B). If the
buckle is detached from the rubber belt,
the ALR mode may become deactivated
and a child restraint system used in the
rear center seat position may not be
secured, resulting in serious injury or
death to a child using the child restraint
system and/or other occupants. Always
make sure that the buckle is passed under
the rubber belt as shown in the illustration
below.
Installation
1. Place the child restraint system on the seat
where you wish to install it.
To help assure proper fitting of the child
restraint system, always remove the head
restraint.
2. Route the seat belt through the child
restraint system according to the instruc-
tions provided by the child restraint sys-
tem's manufacturer. Then insert the seat
belt latch plate into the buckle. Make sure
you hear a "click" when you insert the
latch plate into the buckle.

Advertisement

Table of Contents
loading

Table of Contents