Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 50

 Booster cushion
CAUTION
 Do not remove the head restraint when
installing a booster cushion.
1. Open the gap a little between the seat
cushion (A) and the seatback (B) with
your hand to locate the lower anchors (C).
2. Push the anchor connectors (D) on the
booster cushion into the lower anchors
(C) in accordance with the instructions
provided by the child restraint system's
manufacturer.
Remember, the lower anchors (C) pro-
vided with your vehicle are designed to
secure suitable booster cushions com-
patible with the LATCH system in the
outboard positions of the rear seats
only. The anchor connectors are NOT
designed to secure a suitable booster
cushion in the middle seating position
of the rear seat.
A- Vehicle seat cushion
B- Vehicle seatback
C- Lower anchor
D- Connector
WARNING
 If there is any foreign material in or
around the lower anchors, remove it
before installing the booster cushion. Also,
make sure the seat belt is away from, not
looped through or otherwise interfering
with, the booster cushion. If foreign mat-
ter is not removed and/or the seat belt
interferes with the booster cushion, the
booster cushion will not be secured prop-
erly, could detach and move forward in
the event of sudden braking or an acci-
dent, and could result in injury to the
child or other vehicle occupants.
 When the vehicle is moving, do not adjust
the seat where the booster cushion is
installed.
Child restraint systems
3. Sit the child in the booster cushion.
Fit the seat belt to the booster cushion
according to the child restraint system's
manufacturer
WARNING
 When using a child restraint in a rear
seating position, always
instructions provided with that restraint
to make sure it is compatible with this
vehicle and to understand how to properly
install it.
Child restraints, including booster seats,
come in different sizes and configurations.
Depending on where you place these child
restraints, and depending on their size and
configuration, you may not be able to
access or properly use one or more adja-
cent seat belt assemblies. If this occurs,
the adjacent seating position or positions
should not be used. Failure to use a seat
belt or improper use of a seat belt can
result in serious injury or death should a
crash occur.
Installing a child restraint sys-
tem using the seat belt (with
emergency/automatic locking
mechanism)
With the exception of the driver, the seat belt
in all other seating positions can be converted
Seat and restraint systems
4
review the
N00407301625
4-21