Table of Contents
Advertisement
[Except for vehicles equipped with the
F.A.S.T.-key]
Turn the ignition switch to the "ON" posi-
tion from the "ACC" or "OFF" position.
[For vehicles equipped with the F.A.S.T.-
key]
Change the operation mode to ON from
ACC or OFF.
Auto reset mode
When the average fuel consumption is
being displayed, if you hold down the
multi-information display switch, these
calculations will be reset to zero.
When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display will
automatically reset.
[Except for vehicles equipped with the
F.A.S.T.-key]
The ignition switch has been set to the
"ACC" or "OFF" position for about 4
hours or more.
[For vehicles equipped with the F.A.S.T.-
key]
The operation mode has been set to ACC
or OFF for about 4 hours or more.
NOTE
The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
Disconnecting the battery cable will erase
from memory the manual reset mode or auto
reset mode setting for the average fuel con-
sumption display.
The initial (default) setting is "Auto reset
mode".
Changing the fuel consumption
display unit
The fuel consumption display unit can be
changed. The distance and amount units are
also switched to match the selected fuel con-
sumption unit.
1. When you lightly press the multi-informa-
tion display switch a few times, the infor-
mation display switches to the average
fuel consumption display.
Refer to "Information display" on page
5-79.
2. Press and hold the multi-information dis-
play switch for about 5 seconds or more
until buzzer sound is heard twice.
Multi-information display
3. Press and hold the multi-information dis-
play switch to switch in sequence from
"km/L" "L/100 km" "mpg"
"km/L".
N00557100156
NOTE
The display units for the driving range, the
average fuel consumption are changed, but
the units for the indicating needle (speedom-
eter), the odometer, the trip odometer and the
service reminder will remain unchanged.
If the battery is disconnected, the memory of
the unit setting is erased and it returns auto-
matically to factory setting.
The distance units is also changed in the fol-
lowing combinations to match the selected
fuel consumption unit.
Features and controls
5
5-85
Advertisement
Chapters
Table of Contents
