Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 165

Combination headlights and dimmer switch
the light switch to the "OFF" or "AUTO"
position*, or close the driver's door to stop
the tone.
*: Whether or not your vehicle is equipped
with "OFF" or "AUTO" position on the
combination headlights and dimmer
switch depends on the vehicle specifica-
5
tions.
Dimmer (high/low beam
change)
To change the headlights from high beam to
low beam and vice versa, pull the turn signal
lever to (1). Switch the headlights to low
beam as a courtesy whenever there are
oncoming vehicles, or when there is traffic
moving ahead of you. An illuminated blue
light in the instrument cluster indicates when
the headlights are on high beam.
5-94 Features and controls
Headlight flasher
N00549900142
You can flash the high beams by pulling the
lever gently toward you (2). The lights will
go back to normal when you let go. While the
high beam is on, you will see a blue light on
the instrument panel.
NOTE
 You can flash the high beams by pulling the
lever toward you, even if the headlights are
off.
 If you turn the lights off with the headlights
set to high beam illumination, the headlights
are automatically returned to their low beam
setting.
Automatic High Beam (AHB)
so equipped)
The Automatic High Beam (AHB) turns the
high beam light on or off automatically
according to surrounding light conditions.
The sensor (A) detects lights, such as the
lights of an oncoming vehicle, a vehicle
ahead or street lights.
N00550001241
WARNING
 Do not rely solely on the AHB. Always
observe surrounding traffic and light con-
ditions. If necessary, manually turn the
high beams on or off.
Refer to "Dimmer
change)" on page 5-94.
(if
N00591300103
(high/low beam