Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 78

3. Press the LOCK button (1) for 4 to 10 sec-
onds and press the UNLOCK button (2)
during this time.
4. Release in sequence the UNLOCK and
LOCK buttons within 10 seconds of
pressing the UNLOCK button in step 3.
Turn signal lights deactiva-
tion/reactivation
The turn signal lights answerback function
can be changed.
If you want to change the answerback func-
tion, please contact an authorized Mitsubishi
Motors dealer.
Using the panic alarm
If you are near your vehicle and feel threat-
ened, you may acti-vate the alarm to call
attention as follows:
1. Press the PANIC button (3) for more than
1 second.
2. The headlights will blink on and off and
the horn will sound intermittently for
about 3 minutes.
3. To turn off the alarm, press any button on
the remote control transmitter.
Replacement remote control
transmitters
Only remote control
grammed with the vehicle's electronics can
lock or unlock all doors.
If you lose the remote control transmitter, you
can order a remote control transmitter from
your authorized Mitsubishi Motors dealer by
referring to the key number.
To prevent vehicle theft, the ID code for the
remote control transmitter must be changed.
Take your vehicle and all remote control
transmitters to your authorized Mitsubishi
Motors dealer to have your ID code changed.
Additional remote control
N00543700034
transmitters
To add a remote control transmitter, you must
already have 1 registered remote control
transmitter.
Registering the ID code can be done by your
authorized Mitsubishi Motors dealer.
Take your vehicle and any remaining keys to
your authorized Mitsubishi Motors dealer.
Keyless entry system (if so equipped)
NOTE
 You are provided with 2 remote control
transmitters, but you may register up to 4
N00543801090
remote control transmitters.
transmitters pro-
General information
Your keyless entry system operates on a radio
frequency subject to Federal Communica-
tions Commission (FCC) Rules. This device
complies with Part 15 of FCC Rules.
Operation is subject to the following two con-
ditions.
 This device may not cause harmful inter-
ference.
 This device must accept any interference
received, including interference that may
cause undesired operation of this device.
N00543900078
WARNING
 Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's authority
to operate the equipment.
N00546101153
Features and controls 5-7
5