Table of Contents
Advertisement
Type B
Sym-
No.
Electrical system
bol
SBF1
PTC heater
SBF2
PTC heater
SBF3
PTC heater
*: Fusible link
Some fuses may not be installed on your
vehicle, depending on the vehicle model
or specifications.
The table above shows the main equip-
ment corresponding to each fuse.
The fuse block does not contain spare 7.5 A,
10 A or 15 A fuses. If one of these fuses
burns out, substitute with the following fuse.
7.5 A: Outside rearview mirrors
10 A: Option
15 A: Cigarette lighter
When using a substitute fuse, replace with a
fuse of the correct capacity as soon as possi-
ble.
Identification of fuse
Capacity
7.5 A
10 A
Capac-
15 A
ity
20 A
40 A*
Green (fuse type) /Pink (fusible
30 A
40 A*
40 A
Green (fusible link type)
40 A*
Fuse replacement
1. Before replacing a fuse, always turn off
the electrical item concerned to the fuse
and turn the ignition switch to the "OFF"
position or put the operation mode in
OFF.
2. There is a fuse remover (A) in the engine
compartment fuse block.
Color
Brown
Red
3. Clamp it on the fuse you wish to remove,
Blue
and pull the fuse straight out from the fuse
Yellow
block.
link type)
N00954900131
4. Use the fuse location diagrams and the
matching tables, to check the fuse that is
related to the problem. If the fuse is not
blown, something else must be causing
the problem. Have the system inspected
by your authorized Mitsubishi Motors
dealer or a repair facility of your choice.
Vehicle care and maintenance
Fuses
9
9-27
Advertisement
Chapters
Table of Contents
