Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 41

Seat belts
Adjustable seat belt shoulder
anchor (front seats)
The seat belt anchor height can be adjusted.
To move the anchor, pull the lock knob (A)
4
and slide the anchor to the desired position.
Release the lock knob to lock the anchor into
position.
WARNING
 Always adjust the shoulder belt anchor so
that the shoulder belt is positioned across
the center of your shoulder without touch-
ing your neck. The shoulder belt should
not be able to fall off your shoulder. Fail-
ure to follow this instruction can adversely
affect seat belt performance and increase
the risk of serious injury or death in the
event of an accident.
4-12 Seat and restraint systems
WARNING
 Adjust the shoulder belt anchor only when
the vehicle is not in motion.
N00406300357
 Make sure the anchor is securely locked in
position after adjusting it.
Seat belt guide strap (rear seat)
The seat belt guide straps are equipped on the
seatback.
The seat belt guide strap will provide comfort
by keeping away the belt webbing from your
neck.
Installation
1. Unfasten the button (A) of the seat belt
guide strap. Put the seat belt webbing
through the seat belt guide strap and fas-
ten the button.
N00419301055
CAUTION
 Make sure the part of the seat belt webbing
you inserted into the seat belt guide strap is
not twisted.
Twisted webbing may adversely affect seat
belt performance.