Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 201

Automatic air conditioning
Air conditioning switch
Push the switch, and the air conditioning
compressor will turn on. The "
will be shown in the display (A).
7
Push the switch again and the air condition-
ing compressor will stop and the indicator
goes off.
Personalizing the air conditioning
switch (Changing the function set-
ting)
You can change the following functions to
match your preference.
 Enable automatic air conditioning control:
7-8 Comfort controls
When the AUTO switch is pressed, or
when the temperature control switch has
N00737301409
been set to the minimum temperature, the
air conditioning switch is automatically
" indicator
controlled.
 Disable automatic air conditioning con-
trol:
The air conditioning switch is not auto-
matically controlled, unless the air condi-
tioning switch is used.
 Changing the settings
Press the air conditioning switch for about
10 seconds or longer.
When the setting has changed, the system
will beep and the "
flash.
• When the setting has changed from
enabled to disabled,
the system will beep three times and the
indicator will flash three times.
• When the setting has changed from dis-
abled to enabled,
the system will beep two times and the
indicator will flash three times.
N00759800090
NOTE
 The factory setting is "Enable automatic air
conditioning control".
NOTE
 When the defogger switch is pressed, the air
conditioning will run automatically, even if
the system is set to "Disable automatic air
conditioning control", in order to prevent
windows from fogging up.
AUTO switch
When the AUTO switch is pressed, the mode
selection, blower speed adjustment, recircu-
lated/outside
adjustment, and air conditioner ON/OFF sta-
tus are all controlled automatically.
The "AUTO" indicator will be shown in the
" indicator will
display (A).
N00703500016
air selection, temperature