Table of Contents
Advertisement
11- Mode selection display
12- Air selection indicator
13- Air conditioning indicator
14- AUTO indicator
15- Blower speed display
NOTE
There is an interior air temperature sensor
(A) in the illustrated position.
Never place anything over the sensor, since
doing so will prevent it from functioning
properly.
A sound will be made every time you push
any of the switches.
Blower speed selection switch
Press
of the blower speed selection
switch to increase the blower speed.
Press
of the blower speed selection
switch to decrease the blower speed.
The selected blower speed will be shown in
the display (A).
1- Increase
2- Decrease
NOTE
Due to a drop in the battery voltage or some
other problem, the blower speed may tempo-
rarily become less than the selected blower
speed display setting or the fan may stop.
If the fan stops, turn the ignition switch to
the "OFF" position or put the operation
mode in OFF, wait a few minutes, and then
turn the ignition switch back to the "ON"
position or put the operation mode back in
ON.
In the following cases, have the system
N00736901307
inspected by your authorized Mitsubishi
Motors dealer or a repair facility of your
choice.
• The blower speed remains lower than the
blower speed set using the blower speed
display or the blower speed decreases fre-
quently.
Automatic air conditioning
NOTE
• The fan does not operate even after stop-
ping and restarting the engine or the fan
stops frequently.
Temperature control switch
Press
or
of the temperature control
switch to the desired temperature.
The selected temperature will be shown in the
display (A).
NOTE
The temperature value of air conditioning is
switched in conjunction with outside temper-
ature display unit of the multi information
display.
Refer to "Changing the temperature unit" on
page 5-86.
Comfort controls
N00737001406
7
7-5
Advertisement
Chapters
Table of Contents
