Mitsubishi MOTORS MIRAGE G4 2022 Owner's Manual page 46

NOTE
 Before purchasing a child restraint system,
try installing it in the rear seat to ensure
proper fit. Due to the location of the seat belt
buckles and the shape of the seat cushion, it
may be difficult to securely install some
manufacturer's child restraint systems.
If the child restraint system can be pulled
forward or to either side easily on the seat
cushion after the seat belt has been tightened,
choose another manufacturer's child restraint
system.
Depending on the seating position in the
vehicle and the child restraint system that
you have, the child restraint system can be
attached using one of the following 2 meth-
ods:
• Attach to the lower anchorage in the rear
seat ONLY if the child restraint system is
compatible with the LATCH system (See
page 4-17).
• Attach to the seat belt (See page 4-21).
Installing a child restraint sys-
tem using the LATCH (Lower
Anchors and Tethers for chil-
dren) system
Lower anchor locations
The outboard seating positions in the rear seat
of your vehicle are equipped with lower
anchors for attaching child restraint systems
compatible with the LATCH system.
Tether anchor locations
Your vehicle has 3 attachment points on the
rear shelf, located behind the top of your rear
seat. These are for securing a child restraint
system tether strap to each of the 3 rear seat-
N00418801183
ing positions in your vehicle.
Seat and restraint systems
Child restraint systems
N00418901230
4
4-17